As you make your way across the Caribbean you’ll encounter different methods of cooking curry dishes, influenced by one’s own preference and family traditions. A prime example is my way of cooking coconut curry chicken.. as I’m about to share. My technique and ingredients will differently differ from other recipes you’ll see… even the way I’d see my mom and grandma make their version. Coincidentally I don’t recall mom using coconut in curry chicken, unless it was a tough chicken (we say yard fowl), where the use of the coconut acted as a tenderizer.

You’ll Need…

3-4 lbs chicken (cut into small pieces)
3/4 teaspoon salt
1/4 teaspoon black pepper
1 tablespoon tomato ketchup
4 sprigs thyme
2-3 scallions (chopped)
2 tablespoon parsley (chopped)
1/3 scotch bonnet pepper
1 cup coconut milk
1 1/2 tablespoon curry powder
2 tablespoon veg oil
1/2 medium onion (diced)
4-6 cloves garlic (smashed)
3 cardamom pods
1 cup water
4-6 grape tomatoes (optional)
2 tablespoon cilantro (chopped)

Important! If doing this recipe gluten free please go through the entire list of ingredients to ensure they meet with your specific gluten free dietary needs.. especially the curry powder you use, as some may contain flour as a filler. Also, I used dark/bone pieces of chicken, but this recipe will work just as great with chicken breast.

Season the clean chicken with everything except the oil, coconut milk, curry powder, onion, garlic, cardamom, tomato, cilantro and water. Allow it to marinate for at least 2 hours.

Heat the vegetable oil (coconut oil will be perfect too) on a medium flame then reduce to low and add the diced onion and smashed garlic. Cook for 3 minutes on low. Then add the cardamom and cook another minute or so. Next up add the curry powder (still on low) and stir well. Cook on low to cook off the raw curry taste and to bloom the spices which makes up the curry powder. It will go darker, clump and your kitchen will have a lovely scent of curry.

Now add the coconut milk, turn up the heat and bring to a boil. Then reduce to a med/high heat and cook for 8-10 minutes. The goal is to cook off the liquid and really intensify the coconut flavor. You should end up with a thick base, with hints of the oil you started off with (plus oil from the coconut milk). Stir well as the natural sugars will want to stick/burn.

Here’s where you’ll now add the seasoned chicken and stir well. It’s ok if the marinade goes in as well. The goal here (high heat) is to coat and sear the pieces of chicken with the coconut curry base. Add the water to the same bowl you marinated the chicken in and stir to pick up any marinade left back. Cook the chicken for 7-10 minutes or until you’ve burned off any liquid it may have sprouted naturally.

In the image above you’ll notice that I added an entire scotch bonnet pepper as I like this dish very spicy.. adjust to your own liking. Also remember to wash your hands with soap and water after handling such spicy peppers. After the chicken is full seared/coated and you don’t have any liquid in the pot (this step was to infuse the chicken with the coconut curry flavors) it’s now time to add the water and stir well. This step is to fully cook the chicken and develop a thick gravy.

Bring to a rolling boil, cover the pot slightly ajar and cook for another 15 minutes. Then here’s where you personalize things. Taste for salt /adjust and cook until you get the desired thickness you like your gravy. For me this was perfect at this point as I knew it would thicken as it cools. Add the chopped cilantro and tomato (use shado benin/culantro if you have) and turn off the stove.

Please watch the video below to further assist in perfecting this coconut curry chicken. Some of you may question my use of ketchup and tomatoes.. both brings their own flavor and uniqueness, especially a bit of acidity in helping to balance things. BTW- tomato is very natural (and important) in cooking curry chicken when it originated.

Do you own a copy of my cookbook ?- The Vibrant Caribbean Pot 100 Traditional And Fusion recipes Vol 2

Meat & Poultry

Jamaican Curry Goat Recipe.

May 28, 2025December 5, 20169 Comments

While we use the same ingredients and for the most part cook similar dishes, you’ll find that as you travel across the West Indies the technique we employ on each island differs. That is exactly the case with one of the most famous dishes coming out of the Caribbean, Curry Goat. A curry goat from Trinidad and Tobago will most certainly be different than one from Grenada and just as unique as one done in a Guyanese or Haitian home. I’ve shared several methods of cooking curry goat so far, but it seems we’ve not had a go at a Jamaican version, until now.

You’ll Need…

2 1/2 lbs goat
3/4 teaspoon salt
2 small onions (or 1 large)
1/2 scotch bonnet pepper
1 1/2 – 2 tablespoon curry powder
2 tablespoon veg oil
5 sprigs thyme
2 scallions (chopped)
1 bay leaf (optional)
8 allspice berries (aka pimento berries)
3 cups water
3 medium potatoes

IMPORTANT! If doing this recipe gluten free, kindly go through the entire list of ingredients to ensure they meet with your specific gluten free dietary needs. Especially the curry powder you use as it may contain flour as a filler. Wash your hands with soap and water immediately after handling such hot peppers.

I’d recommend using goat meat with bones as you’ll get much more flavor (and cheaper) than with boneless goat. Have your butcher cut the pieces for you as you’ll need a saw to cut through the bones. Wash the meat with water and the juice of a lime or lemon (not mentioned in the ingredient list), drain and get ready to season.

With the goat meat (washed) in a large bowl, go in with the salt, onion, scotch bonnet (I used a habanero..any hot pepper will work) and the curry powder. Give it a good stir (feel free to add a bit of olive oil to the marinade if you wish) and set it in the fridge to marinate overnight or at least 2 hours.

Heat the oil in a wide/heavy pan (one with a lid) on medium heat and add the pieces of marinated goat. Stir well and try to sear the pieces, while infusing that lovely curry base. Don’t cover the pot at this point. After about 5 minutes, it’s time to add the all the other ingredients except the water. Give everything a good mix in the pot Add the water to the bowl you seasoned the goat in and mix it around to pick up any remaining marinade.

Pour in the water, raise the heat to high, then as it comes to a boil reduce to a gentle simmer and cover the pot. Allow this to cook slowly for 1 1/2 hrs. The goal is to get it tender.

If you find that you’re running out of liquid in the pot you can always add a cup or two of hot water. It’s now time to add the potato (1/4) and tuck in under the liquid. Give another 30 minutes or so to fully cook.

By now you should have tender goat, thick gravy and soft pieces of potato. Taste for salt and adjust to your liking. I try not to play around much with the pot after adding the potatoes as I like them maintaining their shape and texture. BUT.. should you want to thicken your gravy even more, you can crush a couple pieces with the back of your spoon. Depending on how old the goat was (when it was butchered) the 2 hours of cooking time will be enough to have the meat falling off the bones (but that’s not always the case). The potato not only adds a lovely texture and taste to this curry goat, but it’s a great way to stretch 2 1/2 lbs of meat. As you turn off the stove you can top with some chopped parsley or cilantro as I did. Keep in mind that as it cools the gravy will thicken up a bit.

Feel free to add garlic, a stick of cinnamon and/or a bay leaf while cooking for even more unique flavor. If you’re familiar with how curry goat is cooked on the islands, you’ll identify the slight differences of this Jamaican curry goat recipe. Feel free to use lamb/ mutton instead of the goat for similar results.

Are you following us on Facebook, Twitter and Instagram yet? Join in on the fun today!

Gluten Free Meat & Poultry

Curry Pork With String Beans.

May 27, 2025January 27, 2016Leave a Comment

I may have mentioned before that while growing up on the islands mom never made any sort of curry dishes with pork, so I credit my aunt Victoria (I speak about her in my book) for passing the basics of this recipe on to me, when I lived with her during my early years in Canada. Her version included a bit more cooking (I like my beans with a slight crunch) and a little heavier on the curry, so this version of curry pork with green beans is personalized to my liking.

You’ll Need…

1 lb pork (cubed)
1 heaping tablespoon Caribbean green seasoning
2 tablespoon curry powder
1/2 scotch bonnet pepper
4 cloves garlic
1 shallot (or small onion)
1/4 teaspoon black pepper
1/2 teaspoon salt
1 tomato (diced)
1 teaspoon ketchup
1 teaspoon grated ginger
2 cups water
1 1/2 lbs green beans (trimmed)

Note: If doing this recipe gluten free, please go through the entire list of ingredients to ensure the meet with your specific gluten free dietary needs – especially the curry powder which could contain flour as a filler.

Start but cutting the pork (use a cheap cut with a bit of marbling) into 1 inch pieces, wash (with lemon or lime juice and water – not mentioned in the ingredient list) and drain. Now season with the salt, black pepper, tomato, Caribbean green seasoning, ketchup, grated ginger and scotch bonnet pepper (don’t use any seeds nor white membrane surrounding the seeds – that’s where it’s most hot). Stir well and allow to marinate for an hour or two.

It’s now time to heat the oil in a pan (I like using a non stick pan when cooking curry so I can use less oil) on low heat, then go in with the crushed garlic and sliced shallot. Cook on low for 3 minutes, then add the curry powder and cook another 4 minutes. This will toast the spices which makes up a curry blend and allow for a wicked base of flavors.

Turn up the heat to medium/high and add the marinated pieces of pork. Yes, it’s ok if the marinade goes into the pan as well. Stir well, turn down to medium, lid closed and cook for 10 minutes. It will spring its own natural juices. Stir every 3-4 minutes.

As the pork cooks, you can trim your beans (use french beans, string beans or bodi aka yard beans if you wish).. trim off the ends (discard) and cut into 1 to 1.5 inch pieces.

To infuse the pieces of pork with that lovely curry flavor, it’s now time to remove the lid, turn up the heat and burn off all accumulated liquid.

In the same bowl you marinated the pork, add the two cups of water to pick up any remaining marinade. Now add that water to the pan and bring to a boil. Lower to a simmer/rolling boil and cook for 25 minutes (lid slightly ajar).

At this point you should add the beans of choice and stir well. Bring to a boil and cook for 10 minutes (as mentioned I like my beans with a bit of texture) or until the beans are tender to your liking. If you’re using bodi it may take a bit longer to cook.

You can cook off any remaining liquid, but I usually like the bit of gravy to go with my hot steamed rice or sada roti. Remember to taste for salt and adjust according as I find the salt we seasoned the pork with is enough for my liking. To add a bit of color to the dish you can add a bit of diced tomatoes after you turn off the stove – the residual heat will warm that through nicely.

Gluten Free Meat & Poultry

Island style Curry Pork Recipe.

May 27, 2025October 2, 20149 Comments

Curry wasn’t cooked often in our home when we were growing up (dad was not a fan of curry), especially pork. Mom’s go-to recipe when it came to pork was either stewed (stewed pork recipe) or roasted in the oven. When I moved to Canada and started living with my aunt (mentioned her in my cookbook), I learned to both appreciate and master the art of cooking Caribbean style curry dishes. Pork being one of them.

This curry pork is absolutely delicious.. tender pieces of pork, simmered in a delightful curry sauce which is not heavy and wickedly spicy if you break the scotch bonnet when cooking. The key here is to try and get pieces of pork with bones.. lean pork will work, but the bones gives it that extra layer of flavor (IMO).

You’ll Need…

3 lbs pork (I used ribs ends)
1 heaping tablespoon Caribbean Green Seasoning
1 tablespoon chopped shado beni (culantro)
2 tablespoon curry powder
1/2 teaspoon roasted Geera (cumin)
1 scotch bonnet pepper
1/2 teaspoon salt
1 tomato
2 shallots
1/2 teaspoon grated ginger
3 cloves garlic
1 tablespoon tomato ketchup
1-2 tablespoons vegetable oil
1 scallion
1/4 teaspoon black pepper
water – about 3-4 cups

Notes: If you cannot source the shado beni (aka culantro), use 2 tablespoons of chopped cilantro. I like using a madras blend curry powder, but one made in the Caribbean (Trinidad and Tobago). If doing this gluten free, do pay attention to the curry powder you use to make sure there’s no flour added. Some curry powder adds flour to their blend.

Cut the pieces of pork (if your butcher didn’t already) and wash, drain and get ready to marinate (this is key). I used a cheap piece (already cut at the grocery store) of pork, with pieces from around the rib area of the piggy. In a big bowl, mix in the green seasoning, salt, black pepper, ground cumin, tomato (diced), salt, ketchup, chopped scallion and grated ginger with the pieces of pork. You have two options here when it comes to the scotch bonnet pepper. If you want raw heat, cut and use as much as you want in the marination process. If you want flavor, when we get the pot going, add the whole pepper and try NOT to break it.. or you’ll release the beast!

* Remember to wear gloves and wash your hands with soap and water immediately after using cut scotch bonnet peppers.

Give everything a good mix, cover with plastic wrap and allow to marinate in the fridge for at least 2 hours (overnight is best). Let’s jump to actually cooking now! Heat the oil in a heavy bottom pan (one with a lid) on a medium heat, then add the diced onion and garlic.. lower the heat as low as it can go and allow the flavors to develop for about 3-5 minutes. With the heat still on low add the curry powder and mix well. The goal here is to cook off the raw taste of the curry so we don’t get a rawness to the finished dish.

It will go darker, you will have that lovely bouquet of curry in your kitchen and it will have a tendency to clump.. that’s natural. If you find that it’s too dry, feel free to add a bit more oil to the pot. After 4-5 minutes, turn the heat to high and start adding the seasoned pieces of pork to the pot. The goal is to coat the pork with the curry and to deglaze the pot.

Bring it up to a boil (it will release natural liquid), then turn it down to medium low, cover the pot and let it go for about 8-10 minutes. Then remove the lid and turn the heat back up to high. We want to burn off all that natural liquid and really intensify that curry flavor in the pieces of pork.

In the same bowl you marinated the pork (don’t discard the marinade), swish around 3 cups of water and set aside for use. Once the liquid is burnt off, it’s time to add that water to the pan (be sure you can see some of the oil we started off at the bottom of the pan before adding the water). Bring that to a boil, then reduce to a gentle simmer, cover the pot and let that slowly braise for about 1.5 hrs.

After its done it’s thing, we have to personalize this a bit (pork should be tender by now).. turn up the heat and burn off the liquid until you have a gravy consistency you like (I like it somewhat thick) and taste for salt. Adjust accordingly as my appreciation for salt will be different than yours. After turning off the stove I like to go in with the chopped shado beni (or cilantro) and let the residual heat help release the flavors from that. Do remember to remove the whole scotch bonnet pepper before serving.

TIP – Pork can be fatty… (remember I didn’t use a lean pork), so you’ll notice that some of the fat will rise to the surface of the pan. Spoon out and discard (not down your sink though – that can clog pipes).

If you want to make quicker work of this you can add it (after the initial 10 minutes of cooking the pork in the curry – before we added the water) to a pressure cooker for about 10-15 minutes (with 2 cups water) After it’s safe to open the pressure cooker, remove the lid and turn up the heat to thicken the gravy.

* This can be frozen with great results. Simply thaw, heat and serve when you’re ready for another dose of curry pork..which also happens to be gluten free. Curry traditionalists may query the use of tomato and ketchup, but I assure you the acid will help balance the flavors nicely.

Gluten Free Meat & Poultry

Lamb Chops Braised In A Coconut Curry Sauce

May 28, 2025March 1, 201324 Comments

As a young fella growing up on the islands I recall lamb not being a very popular choice when it came to meats we prepare (quite honestly.. our mom never made it). Back then and today goat still is the champ when it comes to a good curry. With variations on the recipe itself, you can find curry goat cooked on just about every island in the Caribbean and on the menu in every Caribbean restaurant outside the Caribbean.

I’m no fan of lamb due to a terrible experience I had with grilled lamb I purchase a few years ago (leathery), but this recipe is simply delightful and will become a hit in your home.

You’ll Need…

5 lamb chops (about 3 lbs)
2 tablespoon veg oil
1/2 teaspoon salt
8 grape tomatoes
1/4 teaspoon black pepper
1 1/2 tablespoon curry powder
1 1/2 cup coconut milk
1 tablespoon fresh thyme
2 scallions
3 cloves garlic crushed
1 teaspoon grated ginger
1 tablespoon shado beni chopped
1 cup water
1/4 scotch bonnet pepper (finely diced – no seeds)
1 shallot finely chopped (or onion)
2 tablespoon chopped parsley (flat leaf)

Note. If you don’t have grape tomatoes, use 1 medium tomato chopped. If you don’t have shado beni use 2 tablespoon chopped cilantro. I used a madras blend curry powder out of the Caribbean (much different than the stuff you get from India). For the gluten free version of the lamb curry, do make sure that the curry powder you use does not contain any flour (used as an additive in some case) or it will not meet with your gluten free dietary needs.

Wash and pat the lamb chops dry with paper towels, then heat the oil in a deep/heavy sauce pan on med/high heat. Add the chops, so they brown on each side for a few minutes (you may need to turn the heat down to medium).

Remove the browned lamb chops and set aside. Turn the heat down to low and add a tablespoon more oil if necessary. Toss in the diced shallot (on onion) , crushed garlic and grate the ginger directly into the pot. Let that cook on low for about 3 minutes (be sure to move around) so you get that wonderful flavor base. Now add the curry powder and cook for a couple minutes (stir well). It will go grainy and darker as it cooks. You’ll be hit by a wicked tsunami of flavors at this point. Now add back the browned chops and if there’s any liquid from them..add also. Move around the pan to try and pick up some of that curry base we created.

Now toss in the chopped shado beni, scotch bonnet pepper, scallions, thyme and black pepper. Give it a good stir, then add the salt, coconut milk and water. Turn the heat up so you can bring it to a boil, then reduce the heat to very low so you have a gentle simmer. Cover the pot and let that cook for about 1.5 hrs or until the lamb is tender and falling off the bones. Remember to stir the pot every 10-15 minutes.

Here’s where you may need to personalize this dish a bit. I like my gravy thick, so I turned up the heat to burn off any excess liquid (you can leave gravy or burn it all off) and remember to check to see if it has enough salt for your liking. When the gravy is as thick as you want, toss in the chopped parsley and the grape tomatoes, turn off the heat and cover the lid for about 3 minutes..

The tender pieces of this lamb cooked in the coconut curry sauce will be outstanding as a side for roti, ground provisions, rice, dumplings or even something as simple as a side salad. If you’re adding a little Caribbean flair to your normal dinner, this curry lamb would make for a great addition. If you’re concerned about heat, don’t use any of the seeds of the scotch bonnet pepper as that’s where most of that raw heat is. The earthy flavors from the spices which make up the curry will work well with the mellowness of the coconut milk and the fresh herbs will truly take this dish over the top.

Before you go, don’t forget to check out the latest cooking videos, connect with me on twitter and join our community on facebook. oh yea! leave me a comment below – it’s appreciated.

Gluten Free Meat & Poultry

Curry Beef or Beef Curry?

February 2, 2021October 8, 200948 Comments

I do apologize for being an absent chef the past couple weeks. As mentioned in my last post we were off to Trinidad and Tobago for my sister’s wedding and for a short vacation. And though I had all intention to cook and blog while we were there, there was so much to see and do that I got side tracked. Plus, the MAC computer I had access to, didn’t allow for me to upload my pics via a card reader and I totally forgot to pack my firewire to connect the camera directly.

Curry beef is not something we grew up on, actually the first time I ever tasted curry beef was when I lived with my aunt after first moving to Canada. To date I can probably count the number of times I’ve had curry beef. Not as if I don’t like it, it’s just that I grew up with a taste for stew beef. Looks like I may have to cook this more often as both Indy and Tehya both enjoyed dinner tonight.

You’ll Need…

1 1/2 lbs cubed beef
3/4 teaspoon salt
dash of black pepper
1/4 teaspoon roasted Geera (powder)
2 table spoon curry powder (madras)
1 onion separated (1/2s) – diced
2-3 cloves of garlic – crushed/chopped
2 tablespoons vegetable oil
2 tablespoons water
2 cups water
1 tomato diced
1 tablespoon green seasoning
2 leaves of shado beni (shandon beni)
1 teaspoon ketchup
1/4 hot pepper (I use habanero) Don’t include seeds if you’re afraid of some heat.
1 lime or lemon (juice) to wash the cubed beef before seasoning

Tip: If you don’t have the green seasoning, simply use 1 scallion chopped, a pimento pepper if you have access to one, 1 table spoon thyme, 1 table spoon celery chopped fine, 2 tablespoons cilantro. NOTE: If doing this recipe gluten free, be sure to read the label of the curry powder you plan on using to ensure it meets with your specific gluten free diet. Some curry powder contains flour as a filler.

Start by cutting the beef into 1 inch cubes and then pour the lime or lemon juice over it and rinse with running water. Squeeze off all excess water then season with the… tomato, salt, black pepper, green seasoning, 1/2 of the onion, ketchup, shando beni and roasted geera. Stir well and allow to marinate for about 1 hour.

cubed beef for curry

trini beef curry

curry beef

In a heavy pot, heat the oil on medium to high heat (in the pic I’m using the new iron pot I purchased on my trip.. notice how shiny it is?), then add the remaining onion, garlic and pieces of hot pepper. Allow this to cook for a couple minutes. In the meantime, in a small bowl put the curry powder and add 2 table spoons of water. Stir to form a paste. Then add this paste to the semi cooked onion / garlic and allow this to cook for a few minutes.

guyana beef curry

how to curry beef

caribbean curry recipe

trini curry beef

Now that the curry is cooked a bit, start adding the seasoned pieces of beef and give it a good stir. Bring it to a boil, then cover and turn down the heat to low. You will notice that a lot of natural liquid will form. That’s ok, we’ll use those wonderful juices in the first step of cooking. After you’ve emptied the bowl with the seasoned beef, pour in the 2 cups of water into it and try to pick up all the remaining bits of seasoning… we’ll use this later on.

spicy curry beef recipe

beef curry

Allow this to cook for about 25 minutes covered, then remove the cover and turn the heat back up to high. we want to burn off all the liquid that was released. Stir so it doesn’t burn and when you can see the pot’s bottom dry, add the 2 cups of water we prepared earlier in the bowl that had the seasoned beef. Stir, bring to a boil and reduce the heat back to low. I like my curry beef very tender, so I usually allow it to cook for about another 40 minutes or so.

trinidad curry beef

beef curry sauce

After the 40 minutes or so feel free to check for salt (you may need to add more if you like a lot of salt) and bring the gravy to a thickness you like. if you find that it’s still a bit runny, turn up the heat to allow it to thicken. TIP. If you’d like you can add a couple cubed potatoes the final 25 minutes, but you may need to add a little more salt. Makes for a great curry potato and beef, the kind you’d find when you purchase a beef roti.

caribbean curry beef recipe

curry beef with rice

There you go, a simple and tasty curry beef that’s great on rice or as a side for roti… or to enjoyed as you please. Remember to leave me your comments below.

gluten free curry

Coconut Curry Chicken Recipe.

Jamaican Curry Goat Recipe.

Curry Pork With String Beans.

Island style Curry Pork Recipe.

Lamb Chops Braised In A Coconut Curry Sauce

Recipe Card

Caribbean Coconut Curry Lamb Chops

Description

Ingredients

Instructions

Curry Beef or Beef Curry?

Log In